Replace Lock in UPVC Door
A professional locksmith should be contacted if your upvc door locks aren't functioning properly. They are quick, efficient and finish the job to a very high standard.
Changing a upvc barrel lock isn't a difficult task. You just need to know what you need to do and follow the steps below.
Removing the Barrel Lock
uPVC windows and doors are typical in all kinds of properties. They let natural light get into the home and be opened easily with the correct key. Changing the lock barrel on the uPVC door is a simple task that can be completed in just five minutes. It is a quick fix if you have lost your keys, a tenant has moved out and has not returned it, or the lock barrel is damaged.
The first thing you need to do is remove the handle screws. This is to remove the handles out of the way to access the barrel screw for locking. You should not loosen the screws fast, as this can damage the handles.
Once the screws are removed, locate the screw on the inside of the door that holds the lock to the barrel. This screw is different in color to the other screws on your door and is a bit higher out. Using an Phillips screwdriver, remove this screw. Use the key you use to open the lock, and then insert it into the barrel. Turn it to the right as much as possible. This will release the barrel, making it easier to take off the door.
Now that you have loosened the screw and you're ready to break the pins that support the euro cylinder in place. To do this, you will require pliers that are strong or mole grips. Take the protruding end of the euro cylinder and bend it up and down and side to side. This will cause the support pins to break, thereby holding it in place.
The installation of the new cylinder will be completed after the previous one has been removed. First, you will need to determine the size of the lock cylinder in order to make sure you have bought the appropriate replacement. This can be done by measuring the distance from the center of the circular portion of the keyhole to the center of the square spindle. The measurement should be taken at the upper spindle.
Change the Cylinder
A upvc door's main locking mechanism is an euro cylinder. It is easy to change and don't need an expert locksmith or handyman service. If your lock doesn't have this protection, you should replace it with one that does. These are very inexpensive and can save you money and inconvenience if your locks have been affected by these security threats.
Open the door and stand directly in front of it. This will allow you to easily reach the screws that hold the handle with your hand or an appropriate tool. It is possible to loosen this screw a bit or perhaps a quarter turn to get started.
After this is completed the cylinder will come out easily as it is no longer secured by the screw. Next, you'll need to determine the size of replacement cylinder that you require. There are about 25 different sizes available. You should bring your old cylinder when you buy a new one to ensure it fits.
If you're not sure about the dimensions, measure from the screw hole center to the end of the cylinder. You can be certain that you're buying the right sized cylinders to fit your door made of upvc by measuring from the center of the screw hole to the end of the cylinder.
Insert the new cylinder into your door in the opposite direction you removed the old one. It could be tricky to align the lock cam but it is usually an issue of alignment and will eventually be sorted out.
The next step is to screw in the long screws for securing. After this is done, you can test the new cylinder to ensure it is secured within the door. Then, you can reattach the handle to the door and test it again. If everything is fine, the cylinder lock inside your upvc door has been changed and you should have added a second layer of security to your home.
Change the handle
There are a variety of reasons a door knob or handle may become loose. It could be due to the wear and tear on the handle or the square spindle within the handle. In this case the door handle will need to be replaced.
It is crucial that the door is open to allow it to close between taking the handle off and replacing it. Remove the screws from the inner side of the handle plate using the screwdriver. This will release your handle from the plate. Be careful not to lose these screws as they will need to be re-screwed back to their original position later.
After the handles have been removed, you can now access the cylinder lock within the door. It will be a round or bulb-shaped cylinder. It is only found in multi-point locks used on upvc doors as well as doors made of aluminium. The process of changing the cylinder is similar to changing the handle. The only difference is that you'll need to take the old cylinder out of the door and replace it with a brand new one.
When choosing a replacement handle it is important to think about the size. The handle must be the same size as the original, because it will have to fit into the screws that hold the handle in place. The best place to begin is by referring to the size matrix that will provide the standard sizes of replacement handles along with their keyhole center to handle plate distance.
It is also worth upgrading your handles on your doors made of upvc to more secure ones like a Sold Secure SS301 or a 2* Kitemark set of security handles. This will enhance the security of your home and making it a lot easier to operate the door. The price of these sets may be a little more expensive, but the added peace of mind and added security is well worth the cost. You don't want to have to push the door handle continuously up and down to open and close it.
Change the Lock
The lock on your uPVC can be a vulnerable point for burglars. You may want to upgrade your uPVC door to a multipoint lock to make it more secure. This will include an open hook and deadbolts to ward off burglars. A professional locksmith can assist you with this, but it is also possible to do the job yourself. You will need several tools, but the process is easy and quick.
The first step is loosening the screws that hold in the handle. By using a screwdriver you can take the screws off and put them in a safe spot. Then, you can lift the handle up to reveal the screw that holds the cylinder in its place. The screw can be removed and replaced with a brand new one. Make sure the screw is identical to the original. It must be aligned with the barrel of the lock.
Making changes to the lock of your uPVC can be intimidating. repairmywindowsanddoors.co.uk depend on it to safeguard your home, and an error could result in you not being able to open the door. If you know how to accomplish it, the procedure is fairly simple and is much less expensive than hiring a locksmith.
To change the lock on your uPVC door, you will need to access the inner faceplate of the lock. You will need to see the screw inside the door and the retaining bolt outside the door. Once you've got access to these screws, you are able to remove the faceplate and replace it with a cylinder.
You may need to change the lock of your uPVC door for several reasons. It could be a lost key, or a tenant moved out but did not return keys, or you simply want to increase the security of your home.
A change in a uPVC locking mechanism can be done by anyone with basic DIY skills. You will need to inspect the hinges that are inside the mechanism. This can be difficult to do when the lock is stuck. If the hinges have been lubricated, it should be an easy repair. If you're not sure, it is best to contact a professional.